Product Manual

Page 10 of 28
Ref
Name
Part Number
Quantity
5
elastic collar for holes 40
GB/T893-1986
8
6
square shaft clamp
ZT-03
1
7
washer 10
GB/T95-2002
1
8
square shaft bolt
ZT-04
1
9
square shaft
ZT-05
1
10
square axial sleeve clamp
ZT-06.00
1
11
crossed shaft CA-10
JB/T524-1986
2
The refueling plug is installed on the case cover for oil filling and air breathing. The test plug is
installed on the right side of the second shaft for oil inspection. The thread plug for draining oil is
located at the bottom of the case body.
The big bevel gear and the second shaft spur gear are connected to the second shaft which is
meshed with the spline. Spacers are installed in the middle and the two sides. See figure 3 and Table
3.
Figure 3 - Gearbox Assembly