Product Manual

Page 7 of 22
2. Attach the boom to the top link mounting bracket on the tractor using a top link pin and a linch
pin through the hole at the bottom of the boom.
3. Connect the A frame to the tractor’s 3-point lift arms using the 7/8” pull pins with nut and lock
washer.
4. Remove the top link pin from the A frame. Attach the A frame to the boom after selecting the
desired hole (for angle adjustment), using the 2-3/4” top link and the 7/16” linch pin.
5. Raise the 3-point lift arms high enough to allow room for the auger installation.