Product Manual

Page 17 of 22
2. Using the cut section of the shield as a guide, cut the same amount off the shaft.
3. Repeat steps 1 and 2 for the other PTO shaft section.
4. Use a file to deburr the PTO shafts. Clean up all chips, burrs, and filings from both ends of the
PTO shaft.
Maintenance
Good maintenance is your responsibility.
 Follow good shop practices.
 Keep your service area clean and dry.
 Be sure the electrical outlets and tools are properly grounded.
 Use adequate light for the job at hand.
 Make sure there is plenty of ventilation. Never operate the engine of the towing vehicle in a closed
building. The exhaust fumes may cause asphyxiation.
 Before working on this machine, disengage the PTO, shut off the engine, set the brakes, and
remove the ignition keys.
 Be certain all moving parts on the attachments have come to a complete stop before attempting
to perform maintenance.
 Never work under equipment unless it is securely supported.
 When performing any service or maintenance, always use personal protection devices such as
eye, hand, and hearing protectors.
 Frequently check the digger’s auger. It should be securely fastened and free of nicks and cracks.