Product Manual
Page 4 of 30
Intended Use
The NorTrac 3-Pt. PTO Finish Mower includes a quick coupler PTO driveline shaft and a rear
discharge design, which is an economical choice for use on large homesteads. These NorTrac finish
mowers have widths ranging from 48" to 71
1/2
" for tractors ranging from 20 to 50 HP.
Technical Specifications
Item
#51486
#51487
#51488
Product Type
Mower
Mower Type
Finish
Hitch Type
3-point
Category Type
1
Working Width (in.)
48
60
71
1/2
Required HP
20–50
Gearbox (RPM)
540
Cutting Height (in.)
1
3/8
– 4
1/2
Dimensions W x D x H (in.)
48
1/2
x 51
1/8
x 28
7/8
59
1/2
x 55
1/8
x 28
7/8
73
1/4
x 37
7/16
x 22
7/16
Important Safety Information
Read and understand all instructions. Failure to follow all instructions may result in serious injury
or property damage.
The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this tool. Always be
aware of the environment and ensure that the mower is used in a safe and responsible manner.
Do not allow persons to operate or assemble the mower until they have read this manual and
have developed a thorough understanding of how it works.
Do not modify this mower in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the mower. There are specific applications for which the mower
was designed.
Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger
industrial equipment. There are certain applications for which this equipment was designed. It will
be safer and do a better job at the capacity for which it was intended. DO NOT use this equipment
for a purpose for which it was not intended.
Industrial or commercial applications must follow OSHA requirements.
WORK AREA SAFETY
Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well lit.
Cluttered, wet, or dark work areas can result in injury. Using the mower in confined work areas
may put you dangerously close to other cutting tools and rotating parts.
Do not allow the mower to come into contact with an electrical source. The mower is not insulated
and contact will cause electrical shock.