Product Manual

Page 18 of 30
Maintenance
Safety Precautions
 Make sure there is plenty of ventilation. Never operate the engine of the towing vehicle in a
closed building. The exhaust fumes may cause asphyxiation.
 Before working on this machine, drive to a level area, disengage the PTO, lower the implement
(or if working underneath, raise and block securely), shut off the engine, set the brakes, and
remove the ignition keys.
 Be certain all moving parts on the attachments have come to a complete stop before attempting
to perform maintenance.
 Never work under the equipment unless it is blocked securely. Never depend on a hydraulic
system to keep the implement in a raised position.
 Keep all persons away from the operator control area while performing adjustments, service, or
maintenance.
 Always use personal protection devices such as eye, hand, and hearing protectors, when
performing any service or maintenance.
 Frequently check the mower blades. They should be sharp, free of nicks and cracks, and
securely fastened.
 Periodically tighten all bolts, nuts, and screws and check that all cotter pins are properly
installed to ensure that the unit is in a safe condition.
 When completing a maintenance or service function, make sure all safety shields and devices
are installed before placing the unit in service.
 After servicing, be sure all tools, parts, and service equipment are removed.
 Check to ensure all safety signs are installed and in good condition.
 Do not allow grease or oil to build up on any deck or platform.
 Where replacement parts are necessary for periodic maintenance and servicing, genuine factory
replacement parts must be used to restore your equipment to original specifications. The
manufacturer will not claim responsibility for use of unapproved parts and/or accessories and
other damages as a result of their use.
 If equipment has been altered in any way from original design, the manufacturer does not
accept any liability for injury or warranty.
 A fire extinguisher and first aid kit should be kept readily accessible while performing
maintenance on this equipment
Maintenance Instructions
Before operating the mower, make sure that it is properly lubricated and thoroughly inspected. Only a
minimum of time and effort is required to regularly lubricate and maintain it. Following a regular
program will provide long life and trouble free operation
⚠WARNING
Always disengage the tractor’s PTO before raising the mower for transport or
making adjustments.
Gearbox Lubrication
The gearbox must be filled with SAE 90 EP oil before operating.
To fill the gearbox to the correct operating level:
1. Place the mower on an even and leveled surface.