Product Manual
Page 4 of 14
Intended Use
The 51440 and 51441 NorTrac Landscape Scarifiers are designed to perform ripping, loosening, and
renovation or reshaping of the soil profile. These scarifiers offer 60" and 72" working widths and are
adapted for category 1, 3-point hitch mounting to tractors with 25 to 50 horsepower capabilities.
Technical Specifications
Property
51440
51441
Scarifier Width
66"
77"
Working Width
60"
72"
Approximate Weight
208 lb
235 lb
Number of Shanks
6
7
Number of Adjustments
4 adjustments in 2" increments
Horsepower Rating/Engine
25 to 50 HP
Hitch Type
Limited Cat. with Floating Top Link for Second Implement
Shank Type
3/4" x 2
1/2
" Heat Treated Spring Steel Shanks with Dimpled-On Tips
Important Safety Information
Read and understand all instructions. Failure to follow all instructions may result in serious injury
or property damage.
The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this tool. Always be
aware of the environment and ensure that the tool is used in a safe and responsible manner.
Do not allow persons to operate or assemble the scarifier until they have read this manual and
have developed a thorough understanding of how it works.
Do not modify this scarifier in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the product. There are specific applications for which the product
was designed.
Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger
industrial equipment. There are certain applications for which this equipment was designed. It will
do the job better and more safely at the capacity for which it was intended. DO NOT use this
equipment for a purpose in which it was not intended.
Industrial or commercial applications must follow OSHA requirements.
WORK AREA SAFETY
Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well lit.
Cluttered, wet, or dark work areas can result in injury. Using the scarifier in confined work areas
may put you dangerously close to other cutting tools and rotating parts.