Product Manual

Page 24 of 35
If the filter or filter housing is damaged, stop the engine immediately and replace the damaged
components. Failure to stop the machine when the air filter or housing is damaged could result in
permanent engine damage.
Loader Arm and Adaptor Plate Bushings
1. The equipment has 10 Duralon bushings and chromed pins. These are located on either end of
your hydraulic cylinders and on all pivot points of the lift arms.
2. These bushings are wear part and require regular inspection. Worn bushings should be replaced
to avoid damaging loader arms and related components.
Engine Oil
Refer to the engine’s manual for required frequencies for oil changes, the types of oil to be used,
crankcase capacity, and viscosity. Follow all engine manufacturer’s instructions.
Draining and Changing Engine Oil and Filter
1. Start the engine and let it run for 5 minutes to warm the oil for easier draining.
2. Park the machine so the drain side is slightly lower than then opposite side to assure that the oil
drains completely.