STEP 13 NORTHWEST ELECTRIC FIREPLACE MANTEL OWNER’S MANUAL FRONT CONTROL PANEL MAXIMUM LOAD 88Ibs (40kg) — MAXIMUM LOAD obe(1560 T FOR RESIDENTIAL USE ONLY spo WARRANTY VOID OUTSIDE
Table of Contents Electric Firebox Intrusions. i 2-5 Mantel Assembly 6-16 Safety Information ' IMPORTANT SAFETY INFORMATION PLEASE READ ALL OF THE INFORMATION IN THIS OPERATING MANUAL, INCLUDING ALL SAFETY, OPERATING, AND MAINTENANCE INFORMATION. TO AVOID THE POTENTIAL RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, USERS SHOULD FOLLOW THE DIRECTIONS AND WARNINGS IN THIS MANUAL. 1. Read all Instructions before using this heater. Do not use this heater outdoors.
STEP 09 N Safety Information{continued) GROUNDING INSTRUCTIONS DABBER: Improper connection of the equipment-grounding conductor can result electric shock. Check with & qualified electrician or serviceman 1f you are |n doubt as to ‘whet tier the product s property grounded. Do ot madly the ‘g provided with the product. I it will not 5t the outlet, have a proper outlet installed by liquefied electrician. This product must be grounded.
Assembly 1 Attaching the metal trims o Fasten the top trim () to the top of the fireplace insert (W) with two screws (18). Make sure that the right angle side points towards the front of the unit. o Allen and attach iwo side teems (Y) to both tildes of the fireplace Insert (W) respectively with the right angle side facing the front of the uni, using two screws (18) per trim. 2 Installing the fireplace insert o Carefully set the fireplace Insert (W) Into the back of the mantel and center it In the opening.
STEP 05 Operation 4 N Care and Maintenance o Read all instructions and waning prior to operating the appliance. o Ensure that all controls are In the “OFF” position before plugging the appliance In to a properly grounded electrical outset. o The main control panel is located behind the cover at the top right comer on the front. NAH VAST Right: Power ON / OFF Left: Heater ON / OFF KN N =) 'WARNING: Archway disconnect from the prows supply before scanning tha heater. First urn off the main power.
STEP 01 Components Included: STEP 02 CODE DESCRIPTION QTY 1 Top Panel 1 2 Media Shelf 1 3 Case Panel 1 4 Left Side Panel 1 5 Right Side Panel 1 6 Back Panel 1 7 Top Trim Panel 1 8 Upper Trim Panel 1 9 Left Trim Panel 1 10 Right Trim Panel 1 11 Left Front Panel 1 12 Right Front Panel 1 13 Foot Trim Panel 2 14 Foot Panel 4 07
Components Included: CODE PICTURE DESCRIPTION QTy A % Metal Dowel 14 B \ Wood Dowel 32 C % Metal Cam 14 D % Long Screw 11 E % Short Screw 13 F \ Machine Screw 4 G \D Hex Key 1 H > Tapping Screw 12 J @ Plastic Cap 14 Touch-up pen K =) (Please use the enclosed touch-up pen 1 so instantly cover nicks and scratches on the surface and edges.
