Owners manual

KMT121210

ASSEMBLY INSTRUCTIONS

Step 1: Verify package contents

Tent : 1 each

(A) 2 each Main

(B) 2 each Side (Yellow)

(D) 1 each Closet

Step 4: Secure main and side poles

1) With a person holding each end of a main pole (A) flex the pole into an arch. Carefully place

the ends onto the pins located at the stake loops.

2) Repeat this step for the other main tent pole (A) and side tent pole (B).

Step 3: Spread tent, insert poles

1) Spread out the tent flat, floor side down.

2) Insert main poles (A) through the sleeves so the poles cross at top of the tent. Insert yellow

side poles (B) through the sleeves, at the sides of the tent.

3) At roof center,loosley fasten fabric ties.

Step 2: Assemble poles

1) Assemble the tent poles by placing

fiberglass sections into the metal ferrules.

six poles are provided.

(A) Main pole - 2 each

(B) Side pole (Yellow) - 2 each

(D) Closet pole - 1 each

Fiberglass Pole : 6 each (total)

Rainfly : 1 each

Mud Mat : 1 each

Tent Stakes : 14 each

IMPORTANT NOTES:

* Assemble before camping to become familiar

with the assembly.

* Two people are recommended for setup.

* Select a clean, level area for the campsites, free

of debris and sharp objects, away from a

natural watercourse.

* Use of a ground cloth is recommended to

prolong the life of a tent floor and provide

additional insulation and moisture protection.

* To prevent damage to the zippers, unzip the

doors and windows of the tent prior to

disassembly, allowing air to move freely.

* Seam seal the inside stitched seams. This will

improve weather resistance. Available in

sporting goods departments. Discoloration

may occur if applied to outside seams.

KMT121210 03/13