Product Manual

35
10. Assembling and disassembling for
three-jaw tribrach
Disassembling
(1) Tighten the fixed screw.
(2)Rotate the clamp knob 180°(200g)
anticlockwise.
(3)One hand hold up the tribrach, another hand
hold the carry handle of the instrument and lift
out the instrument from the tribrach.
Assembling
(1)Confirm the tribrach clamp knob is
loosened.
(2)Put the instrument into the tribrach lightly,
let the communication port against in the
indentation of the tribrach.
(3)Rotate the clamp knob of tribrach through
180°(200g) clockwise.
(4)Tighten the fixed screw. (Note: don’t
remove the fixed screw from the tribrach.)
Instrument
Tribrach
Clamp button
Fixed screw
Relax
Fig. 25
Clamp knob
Lock screw