Product Manual
15
5.3 How to set the selecting mode
The all parameters could be set in the same interface due to the setting mode is used
code.
[Example] Power auto-off; minimum reading: 5″.
Operating procedure
Operation
Display
1.Turn the power ON and pressing
[R/L] key.
The current data is shown with the
first digit is blinking.
2. Press [▲] key and make the digit
No. 3 blinking
3. Press [ ] key to select “1”
Power on
+
[R/L]
[▲]
[ ]
Digit No.1
Blinking
0 1 0 0 0 0 0
Digit No.7
0 1 0 0 0 0 0
0 1 1 0 0 0 0