M109172B.2 ITEM NUMBER: 109172 SERIAL NUMBER: _______________ Owner’s Manual Instructions for Assembly, Testing, Operation, and Servicing Water Pump Wheel Kit: Outdoor agricultural product used to move North Star water pumps by hand. WARNING READ and UNDERSTAND the Owner’s Manual completely before using this water pump wheel kit. Assemble, test, and use only in accordance with the Owner’s Manual instructions.
Hazard Signal Word Definitions 2
Table of Contents About Your Water Pump ............................................................................................................ 4 Important Safety Information ......................................................................................................4 During Assembly During Operation Unpacking Unpacking ........................................................................................................................................... 5 Unpacking the Manual Bag ......
About Your Water Pump Wheel Kit Thank you for purchasing your North Star Water Pump Wheel Kit! About Your Water Pump Wheel Kit This water pump wheel kit is designed for use with the North Star water pump. It is designed to aid movement, by hand of the water pump unit. The technical specifications for your water pump wheel kit are provided in the “Specifications” section of this manual. Follow all safety precautions presented throughout this manual.
Unpacking Closely inspect all contents in the shipping carton. Note that some parts are shipped inside the manual bag. • If you have missing or damaged components: Contact North Star Product Support at 1-800-270-0810. Handle & Grip Qty 1 Handle Mount Qty 1 Axle Plate Qty 2 Axle Channel Qty 2 Tire Qty 2 The following items are found in the manual bag.
Assembly Step 1: Attach wheels and axle brackets Attach axle plates, axle channels and wheels to the right and left side of the frame, as shown in the figure below, using (4) 5/16” x ¾” bolts, (4) 5/16” nuts, (2) 5/8” x 4” bolts, (2) 5/8” Lock washers and (4) 5/8” Hex nuts. Hand tighten. Axle Plate 5/8” x 4” Bolt 5/16” Nut Axle Channel 5/8” Hex Nut 5/16” x ¾” Bolt 5/8” Lock Washer 5/8” Hex Nut Step 2: Position wheels Make sure the wheels and the rubber feet of the frame are sitting on a level surface.
Assembly Step 3: Attach handle mount to the frame Attach the handle mount to the frame, as shown in the figure below, using (2) 5/16”-18 x 2” bolts and (2) 5/16”-18 nuts. Position handle mount in center of frame. Using a drill and a 3/8 socket bit lock handle mount into place with (2) 1/4” x 3/4” self drilling hex screws.
Machine Components 1. 2. 3. 4. 5. Wheel: Pneumatic wheel assembly. Handle: Pivots in the handle mount to move out of the way during nonuse. Handle Mount: Fastens the handle to the frame. Axle Plate: Fastens the axle to the frame. Axle Channel: Fastens the frame to the axle.
Operation – Using the Water Pump Wheel Kit Step One: Inspect/Repair If the water pump wheel kit has been used previously, it must be prepared BEFORE EACH SUBSEQUENT USE. WARNING Read instructions below carefully for inspecting and preparing the water pump wheel kit. Damaged or missing components could result in injury to the operator or bystanders. Important safety rules: • Replacement parts. If a part needs replacement, only use parts that meet the manufacturer’s specifications.
9172 Exploded View – Rev B.2 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Part Number 82124 789074 30747 782021 82233 82287 82020 782132 82019 82125 782000 782023 82127 82088 Description 5/8” – 11 x 4” Bolt Wheel Grip Handle 5/16” – 18 x 2” Bolt 1/4” x 3/4” Self Drilling Hex Screw 5/16” Nyloc Nut Handle Mount 5/16” Flange Nut 5/8” Hex Nut Axle Channel Axle Plate 5/8” Lock Washer 5/16” – 18 x 3/4” Bolt 10 Qty.
Limited Warranty Dear Valued Customer: The North Star Product you just purchased is built with the finest material and craftsmanship. Use this product properly and enjoy the benefits from its high performance. By purchasing a North Star product, you show a desire for quality and durability. Like all mechanical equipment this unit requires a due amount of care. Treat this unit like the high quality piece of machinery it is. Neglect and improper handling may impair its performance.
WARNING: This product can expose you to Naphthalene, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov. TM Distributed by Northern Tool + Equipment Co., 2800 SouthCross Drive West P.O.
