Product Manual
49
Specifications
Electrical System Requirements
Electrical connection
12 VDC
Amp draw from pump
13 Amps
Sprayer Specifications
Maximum GPM
4.0 GPM (15.16 Liters/min.)
Maximum Pressure
60 PSI (4.13 Bar)
Tank Maximum Capacity
41 Gallons (155.2 Liters)
Shipping Dimensions
41.5" x 33.0" x 20.8"
(105.4cm x 83.8cm x 52.8cm)
Product Dimensions
Assembled w/ boom arms folded
59.0" x 35.75" x 31.75"
in and tongue extended
(150cm x 90.8cm x 80.6cm)
Dry Weight / Weight full of water
100 lb. / 450 lb. (45.3 kg. /204.1 kg.)
Tongue Weight (full of water)
55.1 lb. (25.0kg)
Broadcast Nozzle Specifications
Total Spray Width
100 in. (254 cm)
Max. towing speed
10 10 mph (16kph)
Component Materials*
Tank..............…………
Polyethylene, EPDM
Suction Tube.....………
Boom Components…...
Polypropylene, PVC, Stainless Steel
Stainless Steel, Polyacetal, PP
Hose..................………
PVC, EPDM (Max. Pressure 6.9bar/100psi)
Pump................……….
Polypropylene, Viton
, Santoprene
TM
Valves.............………..
Polypropylene, Polyacetal, Viton®, Nylon
Gun and Nozzle..……..
Brass, EPDM, Stainless Steel, NBR, Aluminum
*Before using any chemical, check to ensure the chemical is compatible with all materials in
the system.
The noise emissions from this product do not exceed 70 dB(A).
Note: The sprayer is not compatible with bleach or chlorine products. Also, pumping any
petroleum based fluid (gasoline, diesel, kerosene, oil) will severely damage the pump.
The manufacturer reserves the right to make improvements in design and/or changes in
specifications at any time without incurring any obligation to install them on units previously
sold.
Any Questions, Comments, Problems or Parts Orders
Call NorthStar Product Support 1-800-270-0810