Product Manual

34
1. Hitch Mount: The hitch mount connects the vehicle hitch to the sprayer.
2. Fill Cap: The fill cap has a vent to allow air to enter the tank as the chemical is dispensed.
3. Regulator: This controls system pressure.
4. Sprayer Pump: The sprayer pump makes the chemical flow to the spray gun and the nozzle.
5. Gun Clips: Use the gun clips to store the spray gun.
6. Boom Arm: The boom arms hold the nozzles. They fold for easy storage.
7. Boom Valves: The boom valves shut off chemical to different boom sections allowing custom spray
patterns.
8. Pivot: The pivot allows the boom arms to fold in for easy storage and breakaway when struck while
towing.
9. Pressure Gauge: The pressure gauge is an indicator of the pressure in the system.
10. Sprayer Tank: The sprayer tank holds the chemical.
11. Spray Gun: Use the spray gun to apply chemical to specific areas.
12. Hose Wrap: The hose wrap provides a storage location for the gun hose on the tank.
13. Fill Marks: Fluid capacity marks. Tank should be level when measuring.
14. Remote Switch: The remote switch connects the battery to the pump power cord and allows the
operator to turn the sprayer pump on and off.
15. Pump Power Cord: The pump power cord connects the remote switch to the pump.
16. Boom Nozzles: The nozzles meter and distribute the chemical to a large area.
17. Suction Tube: The suction tube is the inlet line for the pump. The suction tube has a suction strainer to
prevent debris from entering the pump.
18. Drain Cap: Remove drain cap to empty tank of fluid.
19. Tires: The tires have a wide tread to prevent turf damage.