Product Manual

21
Assembly
Step 8 – Draw tube hose assembly
• Slide hose clamps over both ends of draw tube hose.
• Slide short end of hose over draw tube.
• Slide long end of hose over hose barb elbow fitting located
on the pump inlet.
• Secure both ends with hose clamps until tight.
Tools Needed
• Flat head
screwdriver
Components Needed from Owner’s Manual Bag:
Detailed view
Assembly position
3/4" Hose Clamp
793231
(Qty 2)
Draw Tube Hose
797622
(Qty 1)
Draw tube hose
Hose clamps
Pump inlet
fitting