Product Manual

20
Assembly
Step 7 – Pump to Tank assembly
• Apply soap to bypass hose on regulator.
• Press bypass hose into the grommet.
• Install (4) screws through (4) washers and pump feet and
into threaded holes in tank until tight.
Note: damage to rubber pump feet could occur if screws are
over-tightened.
Tools Needed
• Phillips head
screwdriver
Fasteners Needed from Owner’s Manual Bag:
Screw, #10-24 x 1 1/8"
82061
(Qty 4)
#10 Washer
82068
(Qty 4)
#10 Washer
Screw, #10-24 x 1 1/8"