Product Manual

Assembly

Step 2 – Pump power cord & Tow bar assembly

• Install pump power cord through towbar and zip tie at

shown locations

• Attach 2-pin connector to tow bar assembly with M4 screws

and M4 nuts

• Install snap bushing around cord and push into tow bar hole

Tools Needed

• Phillips head

screwdriver

• 7mm wrench

Fasteners Needed from Owner’s Manual Bag:

5mm Zip Tie

791168

(Qty 1)

M4X.7-14 mm Screw

82668

(Qty 2)

M4X.7 Nut

82669

(Qty 2)

Snap Bushing

798094

(Qty 1)

Use Zip ties to secure cable,

M4 Screws

2-way

connector

M4 Nuts

Snap Bushing

Wire harness shown

installed on the

tow bar assembly