Product Manual

14
Assembly
Step 1 – Axle to base assembly & wheel spacers
• Remove bolts, install the axle into the rear slots, and then
retighten bolts of cart wings.
• Attach with 4 bolts and nuts.
• Slide wheel spacers onto axle.
• Attach with 4 bolts and nuts
• Tighten all bolts and nuts to 20 Ft-lbs.
Tools Needed
• 1/2" Wrench
Fasteners Needed from Owner’s Manual Bag:
5/16" x 3/4" Bolt
82015
(Qty 4)
5/16" Nut
82019
(Qty 4)
Long side of Axle
Rear Slots
Cart Weldment
Wheel spacer
797582
(Qty 2)
Wheel Spacer
Short side of Axle
Axle Weldment
Long side of Axle
Short side of Axle
Remove the bolts,
install the axle, and
then retighten bolts of
cart wings