Product Manual

27
Assembly
Step 13 – Spray Gun Hose to Pump Assembly
• Route gun hose through hose clip.
• Slide hose clamp over end of gun hose.
• Push the hose onto the pump hose barb fitting and tighten
hose clamp.
• Align hose clip with threaded insert on the side of the tank.
Insert bolt and torque to 5 Ft.-Lbs.
Tools Needed
• 1/2” wrench
• Torque wrench
• Flat head
screwdriver
Fasteners Needed from Owner’s Manual Bag:
Hose clip
Hose clamp
Pump hose
barb fitting
5/16” x 1/2” Bolt
Qty 1
82014
Hose Clamp
Qty 1
30746
Hose Clip
Qty 1
777110