Product Manual

20
Assembly
Screw, 1/4"-20 x 28mm
1/4" Flat Washer
Step 7 – Pump to Tank assembly
• Apply soap to bypass hose on regulator.
• Press bypass hose into the grommet.
• Install (4) screws through (4) washers and pump feet and
into threaded holes in tank until tight.
Note: damage to rubber pump feet could occur if screws are
over-tightened.
Tools Needed
• Phillips head
screwdriver
Fasteners Needed from Owner’s Manual Bag:
Screw, 1/4"-20 x 28mm
82702
(Qty 4)
1/4" Flat Washer
82699
(Qty 4)