Product Manual

15
Assembly
Step 2 – Pump power cord & Tow bar assembly
• Install pump power cord through towbar and zip tie at
shown locations
• Attach 2-pin connector to tow bar assembly with M4 screws
and M4 nuts
• Install snap bushing around cord and push into tow bar hole
Tools Needed
• Phillips head
screwdriver
• 7mm wrench
Fasteners Needed from Owner’s Manual Bag:
5mm Zip Tie
791168
(Qty 1)
M4 x .7-14 mm Screw
82668
(Qty 2)
M4 x .7 Nut
82669
(Qty 2)
Snap Bushing
798094
(Qty 1)
M4 Screws
2-way
connector
Use Zip ties to secure cable,
Snap Bushing
Wire harness shown
installed on the
tow bar assembly
M4 Nuts