Product Manual

Assembly

Step 8 – Draw tube & Inlet filter hose assembly

• Slide hose clamps over both ends of draw tube hose.

• Slide short end of hose over hose barb elbow fitting located

on the pump inlet.

• Slide fittings and inlet filter from short end hose

• Secure both ends with hose clamps until tight.

Tools Needed

• Flat head

screwdriver

Components Needed from Owner’s Manual Bag:

3/4" Hose Clamp

793231

(Qty 4)

Draw Tube Hose

797916

(Qty 1)

Hose, 3/4'' PVC

798172

(Qty 1)

Draw tube hose

Hose Clamps

Detailed view

Assembly position

Inlet filter with fittings

(Qty 1)

Inlet filter with

fittings

Hose, 3/4" PVC