Product Manual

9
Assembly Instructions
6.) -Disconnect the vehicle battery ground wire.
-Connect the bare end of the red wire of the battery power cord to positive(+) terminal of the
battery.
-Connect the bare end of the black wire of the battery power cord to negative(-)
terminal of the battery.
-Reconnect the vehicle battery ground wire.
- When you would like to spray, put the remote switch in the "OFF" position.
-Connect the battery power cord to the remote switch (red wire to red wire).
-Connect the solenoid wire to the remote switch.
-Disconnect the battery power cord from the remote switch power cord after each use.
-The battery power cord may remain connected to the battery while the sprayer is not being
operated