Product Manual

11
Operation Instructions
Proper Operation of the Remote Switch
1.) Connect the power cords to the solenoid valve. Turn the remote switch off.
2.) Start the sprayer per the 282711 owner’s manual.
3.) Open the boom ball valve.
4.) Turn on the remote switch, the boom should begin to spray. Follow the 282717 owner’s manual
for boom spraying instructions. If you do not have the 282717 instructions call product support
for a copy.
5.) Turn off the remote switch to stop the spray from the boom.
WARNING
Chemicals are dangerous.
Serious injury or death can result if chemical manufactures instructions are
not followed.
-Pump starts automatically, disconnect the power after each use or before
servicing.
-Make sure boom nozzle points straight down prior to starting the sprayer. An
incorrectly positioned boom nozzle may spray chemicals towards you(see
Installation Instructions).
-Different chemicals may interact dangerously with each other, always flush
the sprayer per the chemical manufactures directions before switching
chemicals.
-Calculate the correct amount of chemical to mix, dispose of excess chemical
per the manufacture's instructions.
-When wind speeds exceed 4 MPH, don't spray. Chemicals can drift into
undesired locations.
-Never operate this sprayer with broken, missing, or loose parts.
-Never spray flammable liquids.
-Never point the spray gun at people or animals.