Product Manual

10
Assembly Instructions
5.) Before operating the sprayer with chemicals, test for leaks, and learn the sprayer operation.
A. Fill the tank with water.
B. Connect the power cords to the solenoid valve. Turn the remote switch off.
C. Start the sprayer per the 282711 owner’s manual.
D. Open the boom ball valve.
E. Turn on the remote switch, the boom should begin to spray.
F. Check for leaks throughout the system. If a leak is detected, fix the leak and re-test
the system.
Assembly is now complete.
Check to make sure all nuts, bolts, and hose clamps are
tight to assure the sprayer is in safe working condition.
Never modify the sprayer design.
Serious injury will result if assembly steps are not
followed or the design of the sprayer is modified.
WARNING