Product Manual

Operation - Using the Sprayer (continued)
31
Step 2: Fill the sprayer.
WARNING
• ALWAYS wear personal protective equipment as directed on the chemical
labels when handling chemicals.
• Long pants and sleeves, chemical resistant gloves, and eye protection are
strongly recommended. Additional protective gear may be required depending
on the particular chemical.
Fill the sprayer using the following steps:
1. Review safety
information
Review the Operation – Important Safety Information section related to General
Chemical Safety and Chemical Accident Procedures provided in this manual.
2. Choose safe
mixing/
loading area
Choose a safe mixing and loading area.
- Choose an outdoor, well-ventilated area away from unprotected people, animals,
food, and other items that might become contaminated.
3. Wear personal
protective
equipment
Wear personal protective equipment as directed on the chemical label. Goggles,
gloves, long sleeves, and pants are recommended while mixing chemicals.
NOTE: Clothes may be damaged by bleach.
4. Turn off
sprayer
Turn OFF power to the sprayer before filling.
5. Remove fill
cap
Remove the fill cap located on top of the sprayer.
6. Ensure tank
flushed
Ensure tank is flushed of all chemicals from prior use.
- Chemicals can interact dangerously when mixed. Residue chemicals are also a health
hazard.
Fill Cap