Product Manual

Machine Components
24
1. Hose Wrap. The hose wrap provides a storage location for the gun hose.
2. Gun Hose. The gun hose transfers chemical from the pump to the spray gun.
3. Fill Cap. Large diameter for easy filling. The fill cap has a vent to allow air to enter the tank as
the chemical is dispensed.
4. Sprayer Pump. The sprayer pump makes the chemical flow to the spray gun and out the
nozzle. The pump is equipped with a Motor Armor system. This system will shut the pump off
in the event of a leak inside the pump cartridge to prevent damage to the motor.
5. Drain Cap. Remove the drain cap to empty the tank.
6. Spray Gun. Use the spray gun to apply chemical to specific areas. When the pump ON/OFF
switch is in the ON position, the spray gun trigger is the pump ON/OFF control. Squeeze the
trigger and the pump turns on, let go and the pump turns off.
7. Gun Clips. Use the gun clips to store the spot spray gun.
8. Sprayer Tank. The sprayer tank holds 13 gallons of liquid.
9. ON/OFF Switch. Allows the operator to turn the sprayer pump on and off.
10. Spray Nozzle. Quick connect allows easy change from fan tip to solid stream nozzle.
11. Suction Strainer. The suction strainer protects the pump from debris and has clear removable
bowl for easy cleaning.
12. Fill Marks. Fill marks are molded into tank to monitor fluid level.
13. Manual Tube. The manual tube provides a location for storing the owner's manual.
14. Handle. The handle is used to lift and move the sprayer. Can be rotated for compact storage.
15. Marine-grade Battery Box. Fits Group 24 battery (battery not included).
16. Battery Monitor. Indicates charge of battery.
17. LED. The red LED light illuminates when there is a leak inside the pump cartridge.