Product Manual

Assembly

Screw, #10 x 28mm

82061

(Qty 3)

Screw, #10 x 32mm

82617

(Qty 1)

#10 flat washer

82068

(Qty 4)

Fitting, QC x 5/8" HB

799878

(Qty 1)

Step 4 – Install pump and fittings

• Remove red shipping plugs from pump ports.

• Install inlet assembly into inlet port of pump and slide QC

clip closed.

• Lubricate tank grommet with water and slide suction tube

into grommet.

• Install pump to tank with (3) #10 x 25mm screws, (1) #10 x

28mm screw, and (4) #10 flat washers. Attach cap tether to

longer screw.

• Install QC x 5/8" fitting into outlet port of pump and slide

QC clip closed.

NOTE: To insert quick connect fittings, lubricate O-ring

with water and twist fitting while inserting into pump port.

Tools Needed

• Phillips

screwdriver

Fasteners Needed from Owner’s Manual Bag:

Fitting, QC x 5/8" HB

Screw, #10 x 25mm

#10 Flat washer

Screw, #10 x 28mm (qty 1)

Cap tether

Inlet assembly

Grommet