Product Manual

Assembly (continued)
8
Step 4: Install broadcast lance and make final connections
Sprayer Item# 2681022
1. Push broadcast lance into broadcast bracket. Note orientation.
2. Connect hose from open port on tee to broadcast lance using two hose clamps.
3. Thread broadcast nozzle hand tight onto the end of the lance, then orient with a 7/8"
wrench so screw is at 12 o’clock position.
Sprayer Item# 26810011, 2681201, 99916, 99917
1. Push broadcast lance into broadcast bracket. Note orientation.
2. Connect hose from pump to broadcast lance using two hose clamps.
3. Thread broadcast nozzle hand tight onto the end of the lance, then orient with a 7/8"
wrench so screw is at 12 o’clock position.
Hose
Hose clamp
Broadcast nozzle
Fitting, 3/8" HB
Tee
Hose clamp
Broadcast lance
Fig06483
Hose clamp
Broadcast nozzle
1/4" NPT x 3/8" HB
Hose
Broadcast lance