Product Manual

14
E. Adjust pressure regulator (if equipped)
Turn pressure regulator knob to adjust outlet pressure
1. Turn knob clockwise to increase pressure.
2. Turn knob counter-clockwise to decrease pressure
Note: If the pressure regulator knob is completely tightened, the
pressure setting will be higher than the pressure switch on the
pump. This allows the pump to operate as a demand pump and turn
on only when spraying.
F. Ensure uniform coverage
To ensure proper coverage, overlap the ends of the spray pattern 12”.
Use the tables in Appendix A to determine what speed to drive your
vehicle for the desired application rate.
IMPORTANT: Make sure broadcast nozzle is oriented to spray straight
down before you start. An incorrectly positioned broadcast nozzle may
spray chemicals on you or others.
NOTE!!
Broadcast lance and spot spray gun can be used simultaneously. Use
the spot spray gun if you desire to apply pesticide only on selected
plants. Use the broadcast nozzle if you wish to spray large ground
areas.
Pressure
regulator knob
Pressure gauge
Fluid bypass
Correct
Incorrect
12” Overlap
12” Overlap