Product Manual

ManualsBrandsNorthStar ManualsAir Tools + CompressorsPortable Gas-Powered Air Compressor — Honda 163cc OHV Engine, 20-Gallon Horizontal Tank, 13.7 CFM @ 90 PSI

Initial Set-Up

Step 1. Inspect & Unpack

Upon receipt, inspect air compressor for missing or

damaged parts. Verify that it is the compressor you

ordered.

See “Component Identification” section of this manual

for a diagram of the compressor and its components.

• For missing or damaged components, contact

Product Support at 1-800-270-0810.

• If complete, fill out product serial number

information. See “Limited Warranty” section of

this manual.

Components:

Figure 1

Fasteners:

Figure 2

Step 2. Assembly

Attach tires and handle:

1. Assemble tires on air compressor as shown.

(Figure 3) Allow 1/16” movement between the

hex nut and wheel. (Figure 4)

Figure 3

Figure 4

2. Attach handle and rubber feet as shown.

(Figure 5)

Figure 5

¾” x 3 ¾” Bolt

Tire

¾” Hex Nut

Air Compressor

Handle

Qty 1

Part # 788188

Tires

Qty 2

Part # 788813

3/4” x 3 3/4” Bolt

Qty 2

Part # 82240

3/4” Hex Nut

Qty 2

Part # 82040

Rubber Feet

Qty 2

Part # 2215

5/16” x 1 3/4”” Bolt

Qty 4

Part # 82094

5/16” x 3/4”” Bolt

Qty 2

Part # 82621

5/16” Nyloc Flange Nut

Qty 6

Part # 82630

5/16” Flange Nut

5/16” x 1 ¾” Bolt

Handle

Rubber Feet

5/16” x ¾” Bolt

5/16” Nyloc

Nut

1/16” Gap

Fig04577