Product Manual

Assembly

Step 1 – Regulator Installation

 Install the regulator into either outlet port at the top of the pump

manifold.

o Use flat blade screwdriver to remove QC clip from the

pump before installing fitting. Snap QC clip back into

pump after fitting is inserted.

Note: The pump is configured for installing the regulator in the

right side of the manifold. If the left side preferred, the QC plug

must first be moved from the left side outlet port to the right side

outlet port.

Tools Needed

 Flat blade

screwdriver

05913

QC Clip

Regulator assembly

QC Clip

Pump port

Insert screw-

driver here to

remove QC clip