Product Manual

56
Assembly Instructions
Tools Needed
• 18mm Wrench
(2 Needed)
• Torque Wrench
Step 12 – Horizontal Latch to Beam
• Align horizontal latch to beam using (2) bolts and (2) nuts.
• Torque to 71 ft.-lb.
• Ensure that the Outrigger leg is in the DOWN position.
• Using the handle on the beam, lower beam to the tow bar. Pull
horizontal lock latch rod outwards to allow the beam to rest properly
on the tow bar. Push latch rod forward to lock in the horizontal
position.
• See page 20 for further instruction.
• Note: If horizontal latch bracket does not latch correctly. Loosen
bolts/nuts and adjust horizontal latch bracket. If further adjustment is
needed, loosen bolts/nuts from Step 11 and adjust pivot mount bracket.
Horizontal Latch to Beam
Flange Bolt
Qty 2
Horizontal Latch to Beam
Flange Nut
Qty 2
Fasteners Needed from Parts Bag:
Bolt
Horizontal Latch Bracket
Nut
Beam