Product Manual

Assembly Instructions

Hoses Needed:

Tools Needed

• 1” Wrench

• 7/8” Wrench

• Crescent Wrench

(2 Needed)

Step 18 – High Pressure Hose Routing

• Route (1) Short High Pressure Hose from the Valve to Cylinder Fitting

on the control valve to the 90° Elbow Cylinder

• Screw finger-tight Short High Pressure Hose to the Valve to Cylinder

Fitting

• Wrench tighten 1.5-3.0 Turns Past Finger Tight

• Screw finger-tight remaining end of Short High Pressure Hose to the

90° Elbow Cylinder

• Wrench tighten 1.5-3.0 Turns Past Finger Tight

Valve to Cylinder Fitting

Short High

Pressure Hose

90° Elbow

Cylinder

Valve to Cylinder Hose

High Pressure Hose, 25” x 1/2” ID with

1/2" Male NPT fittings

Qty 1