Product Manual

Assembly Instructions

Step 14 – Throttle Cable Setup Cont.

• Lower beam to horizontal position and lock the horizontal latch as

shown

• Attach free end of throttle cable to bracket as shown below. Tighten

nuts on cable to secure throttle cable to bracket.

• Attach throttle bracket assembly to beam using (2) Throttle Cable to

Beam Flange Bolts and (2) Throttle Cable to Beam Flange Nut.

• Align bolts in center of slots on throttle bracket. Torque to 21 ft.-lb.

NOTE: Adjust throttle bracket forward or backward for optimal engine

performance.

Tools Needed

• 13mm Wrench

2 Needed

• Torque Wrench

Throttle Cable

Nuts

Throttle

Cable

Nut

Bolt

Throttle

Cable Assembly

Throttle Cable to Beam

Flange Bolt

Qty 2

Throttle Cable to Beam

Flange Nut

Qty 2

Fasteners Needed from Parts Bag: