Product Manual

55
Assembly Instructions
Step 11 D
Step 11 – Install Beam Assembly Cont’d
• Step 11 D: Maneuver log splitter and align with the beam as shown
below.
• NOTE: Once log splitter is in line with beam, put the out rigger leg in
the DOWN position to stabilize splitter for assembling.
• Insert (2) bolts and thread (2) nuts onto bolts.
• Torque to 71 ft.-lb.
Tools Needed
• 18mm Wrench
(2 Needed)
• Torque Wrench
Complete View
Nuts
Bolts