Product Manual

Assembly Instructions

Step 9 – Outrigger Leg to Tank

• Connect the rear outrigger leg to the backside of the hydraulic tank

assembly

• Tighten nut until snug then back off 1/2 turn

• NOTE: Once the Outrigger Leg is installed, lock the leg in the down

position.

Tools Needed

• 15mm Wrench

• 16mm Wrench

Out Rigger Leg

Bolt

Washer

Nut

Out Rigger to Tank

Flange Bolt

Qty 1

Out Rigger to Tank

Washer

Qty 1

Out Rigger to Tank

Nyloc Nut

Qty 1

Fasteners Needed from Parts Bag: