Product Manual

43
Assembly Instructions
Step 1 – Fender to Tank Assembly
• Set hydraulic tank assembly on level surface.
• Detach left and right fenders from hydraulic tank assembly after
unpacking. Discard bolts, washers, and nuts.
• Left and right fenders will be installed on the opposite side as
delivered in the packaging.
• Align left and right fenders to hydraulic tank assembly as shown
below.
• Insert bolts and secure with nuts.
• Torque to 21ft.-lb.
Tools Needed
• 5mm Allen Wrench
• Torque Wrench
Fasteners Needed (Located in Owner’s Manual Bag):
Pictured below is the hydraulic tank
assembly after unpacking from crate.
Remove bolts as shown.
Right
Fender
Left
Fender
Right
Fender
Left
Fender
Bolt
Bolt
Nut
Nut
Fender to Tank
Button Head Cap Screw
Qty 4
Fender to Tank
Nyloc Nut
Qty 4