Product Manual

13
Moving & Towing to the Job Site
7. Put tow bar leg UP
Move the tow bar leg to the “UP” position and lock. (The support leg must
remain in the up position during towing.)
8. Tow to desired
location
Tow log splitter carefully to desired work site.
(See instructions on p. 17 on selecting an appropriate work site)
Important safety instructions:
• Added length. Be aware of the added length of the splitter.
• Speed limit. Never tow this log splitter over 45 mph. Faster speeds may result in
loss of control.
• Rough terrain. Drive slowly and take extra caution when traveling over rough
terrain.
• On public roads. If towing on a public road, make sure to comply with all local,
state, and federal towing requirements. It is the sole responsibility of the purchaser
to obtain licensing, trailer lights, safety chains or signage, as needed to comply.
• Unattended. Turn off the towing vehicle before leaving the splitter unattended.
• Under the influence. Never tow or operate this splitter while under the influence of
alcohol, drugs, or medication
9. Lock leg down
and unhitch
Lock tow bar leg in the DOWN position and unhitch from vehicle.
NEVER operate log splitter while it is attached to the vehicle.
Towing Log Splitter