Product Manual

12
Moving & Towing to the Job Site
5. Attach to hitch (2”
Ball)
Attach log splitter to vehicle hitch
1. Attach log splitter’s coupler to a class 2 or higher hitch with 2" ball (only).
2. Adjust coupler to ball by raising locking lever and turning lock nut with fingers.
3. Proper adjustment is obtained when coupler is as tight as possible on ball and locking
lever can still be opened and closed.
4. Lock lever closed to secure the attachment. An optional locking pin or padlock may
be inserted in the locking lever hole for extra security.
6. Attach safety
chains
Attach safety chains.
1. Two safety chains must be used while towing.
2. Cross safety chains under the coupler allowing only enough slack for vehicle turns.
(unlocked position)
Housing
Locking Lever
(locked position)
Channel Lock
Lock Nut
Ball Clamp
Light Spring
Heavy Spring
Fig02017