Product Manual

Operation - Using the Sprayer (continued)

C. Ensure uniform coverage

To ensure proper coverage, the height of the broadcast nozzles should be 24"-

48" inches from the ground. Using both broadcast nozzles, the spray pattern is

40 feet. However, the spray pattern should be overlapped 36 inches. Use the

tables in Appendix A to determine what speed to drive your vehicle for the

desired application rate.

D. Begin to spray

Open the boom valve and turn the remote switch ON to begin spraying.

9. Leaving

unattended

If the sprayer must be left unattended at any time:

a) Disconnect power to the sprayer.

b) Relieve system pressure by depressing the gun trigger.

c) Turn off the vehicle. Set brake or block the wheels.

10. Discontinue use

if clogged or

inoperative

If the sprayer becomes clogged or inoperative during use, discontinue use

immediately.

- DO NOT attempt to service while chemicals are in the sprayer and power is

connected.

- Return to service area to review instructions for troubleshooting before

attempting to service.

Note: A reserve, clean container capable of holding at least 26 gallons should be kept for use when the

sprayer tank needs to be emptied temporarily for repairs. It is advisable to purchase a reserve tank

suitable for pesticide storage from Northern Tool + Equipment for use in these circumstances. The

container should be properly labeled as to its contents if it is used.

40’

36" Overlap

24"-48"