Product Manual

Operation - Using the Sprayer (continued)
34
8. Operate broadcast
boom
A. Open broadcast nozzle valves
Open the left, right, or both boom valves as desired.
B. Ensure correct spray pattern
Make sure both broadcast nozzles are pointed toward the ground. The screw
on the face of the nozzle should be in the 12 o'clock position. If it is not, use a
wrench to correctly orient the nozzle.
IMPORTANT: Make sure boom nozzles are oriented to spray straight
down before you start. An incorrectly positioned boom nozzle may spray
chemicals on you or others.
Note: It is not unusual for the operator to be exposed to chemical
drips while adjusting the boom nozzle. Chemical resistant
gloves should be worn
Broadcast nozzle valve
Detail view
Fig06512
Screw at 12
o’clock position