Product Manual

6
STEP 5
1. Install grip onto handle.
2. Attach small bumper to handle with 1/4” x 3/4”
self-tapper.
3. Insert (1) 3/8” x 2-1/2” bolt through (1) flat
washer and through one end of lanyard as shown.
Attach 3/8” cotterless pin to other end of lanyard.
4. Install handle to generator using 3/8” x 2-1/2”
bolt, (4) flat washers and (1) 3/8” nyloc nut until
washers press against tube walls.
5. Repeat steps for other handle.
6. Insert cotterless pin through bottom hole of arm so
handle doesn’t fold up while in use.
Any Questions, Comments, or Problems
Call NorthStar Product Support 1-800-270-0810
Ref.
Part #
Description
14
786756
Lanyard
15
82027
3/8” nyloc nut
16
785459
Handle
17
30747
Grip
18
82106
3/8” x 2-1/2” bolt
19
2215
Small rubber bumper
20
82232
1/4” x 3/4” self-tapper
21
38020
3/8” x 2-1/2” cotterless pin
22
82021
Flat washer