Product Manual

5
STEP 4b
Item 165621 only
1. Attach the large rubber foot to the leg using 5/16”
x 1-1/2” bolt and 5/16” flange nut. If installing a
165621 on a 165605, 165606, 165607 Rev V or
later, place the spacer between the rubber foot and
the leg. Revision letter can be found on the serial
number decal refer to the figure to the right for its
location.
2. Remove 5/16” x 2” bolt, star washer, 5/16”
washer and 5/16” nut from generator base.
3. Attach leg to generator base using the fasteners
removed plus (3) 5/16” x 3/4” bolts, flat washers
and 5/16” nuts.
4. Repeat steps for other leg.
Ref.
Part #
Description
1
82021
5/16” washer (reuse from gen.)
2
82301
Star washer (reuse from gen.)
6
82018
5/16” x 2” bolt (reuse from gen.)
9
82019
5/16” flange nut (reuse from gen.)
10
82015
5/16” x 3/4” bolt
11
785296
Leg (165621)
12
15431
Large rubber foot
13
82017
5/16” x 1.5” bolt (165621)
14
797115
Spacer
Serial Number Decal