Product Manual

Installation / Initial Set-Up
21
6. Connecting Generator Wire Harness to Existing Wiring
Follow the detailed wiring sequence to connect the generator wire harness to your existing
generator control panel.
Connect generator
wire harness
WARNING: Each circuit receptacle must be protected with a breaker that is
equal or less rating than the receptacle. Failure to do so could result in damage to
equipment powered by the generator and the generator.
Unit
Watts
Main Breaker
Rating
Total Amps @
120V
1659200
3000
12.5 A
25A
1659201
4000
16A
33.3A
1659202
6000
25 A
50A
To generate 240 Volts: White #2 and White #3 must be connected together.
Neutral wire should be bonded to ground. Consult your local electrical code.