Product Manual

Specifications
30
Electrical System Requirements
Electrical connection………………...
12 VDC
Amp draw from solenoid valve…...…
2.5 Amps
Broadcast Kit Specifications
Maximum GPM……………………..
8.6 GPM (both nozzles @ 40psi)
Maximum Pressure………………….
75 PSI
Overall Spray Width………………...
36 ft.
Recommended Overlap……………...
2 ft. (24 in.)
Component Materials*
Fittings........................…
Brass, Stainless Steel, Teflon, Nylon
Solenoid valve............…
Polypropylene, Stainless Steel, EPDM
Hose............................…
PVC
Y-valve.......................…
Cycolac (ABS), Buna-N
Broadcast nozzles……...
Polypropylene, Stainless Steel
*Before using any chemical, check to ensure the chemical is compatible with all materials in
the system.
The manufacturer reserves the right to make improvements in design
and/or changes in specifications at any time without incurring any
obligation to install them on units previously sold.
Any Questions, Comments, Problems or Parts Orders
Call NorthStar Product Support 1-800-270-0810