Product Manual

Operation – Using the Broadcast Kit
24
Step One: Assess wind conditions and clear work area.
Before you decide to spray, you must determine whether wind conditions are suitable. You must
also restrict access to the work area to ensure the safety of bystanders.
WARNING
Do not spray if wind speeds are greater than 4 MPH or if there are
bystanders in the intended spray area.
1. Assess wind speed
Assess weather conditions to ensure that it is not too windy to spray.
DO NOT SPRAY if wind speeds are greater than 4 MPH.
Visible indication of wind speed:
If leaves are in constant motion or there is any branch movement, DO NOT
spray because the wind is too strong.
2. Clear work area
Clear the work area of all bystanders and pets.
Restrict access by the public for the period recommended on chemical label.
Step Two: Fill the sprayer. See Operation Instructions in the Sprayer’s Manual
Step Three: Operate the broadcast kit.
WARNING
ALWAYS wear personal protective equipment as directed on the
chemical label when spraying.
Long pants and sleeves, chemical-resistant gloves, and eye protection are
strongly recommended. Additional protective gear may be required
depending on the particular pesticide.
1. Review safety
information
Review the “Operation – Important Safety Information” related to
Chemical Application Safety provided in this manual.
2. Wear personal
protective
equipment
Wear personal protective equipment as directed on the chemical label.
3. Connect power
cords
Connect the solenoid valve to a 12V DC power source.
1. Verify the remote switch is connected to the solenoid valve power cord.
2. Turn the remote switch to the “OFF” position.
3. Connect the remote switch to a 12V DC power source.