Product Manual

Assembly
12
36”
5/16 x 1” carriage bolt
Tee handle knob
Nozzle bracket
Ground
3/4” GHT x 1/2”
hose barb
Y-valve
1/2” flat seat hose barb
3/4” swivel nut
Rubber washer
1/2” flat seat hose barb
3/4” swivel nut
Step Seven: Install nozzle bracket
1. Position the nozzle bracket so that the broadcast
nozzles are at a height of 36” from the ground.
2. Attach the nozzle
bracket to the vertical
boom mount with a
5/16 x 1” carriage bolt
and tee handle knob.
Step Eight: Build Y-valve assembly
1. Thread the 3/4” GHT x 1/2” hose barb
into the base of the Y-valve.
2. Place (2) rubber washers between (2)
1/2” flat seat hose barbs and the two
branches of the Y-valve. Place (2) 3/4”
swivel nuts over the flat seat hose barbs
and tighten onto the branches of the Y-
valve. (See illustration)