Product Manual

Machine Component Identification – Item #165915F.1 (cont’d)
9
REFERENCE GUIDE
Reference 1 – Circuit Breakers
This belt driven single-phase generator has 2,
11 amp (A) push to reset circuit breakers to
protect against electrical overloads.
Reference 2 – 240V Receptacle
The duplex on the left is a 240V 15A NEMA 6-
15R receptacle. This receptacle accepts a
NEMA plug number 6-15P.
Reference 3 –120V Receptacle
The generator has an end cover with two
duplexes (two receptacles in a common
housing). The duplex on the right is a 120-volt
(V) 15 amp (A) straight blade receptacle,
National Electrical Manufacturer’s Association
(NEMA) number 5-15R. This receptacle accepts
NEMA plug number 5-15P. Each receptacle on
the duplex is capable of drawing 11A.
Reference 4 – Ground Screw
Ground the generator via the ground screw, to a
copper pipe or rod that is driven into moist soil.
Reference 5 – 7/8” diameter
shaft
The shaft is 1.50” long and has a 3/16” keyway.
Reference 6 – Mounting feet
Use these three locations to bolt the generator
head in place.
Reference 7 – Fan Vents
Never block the vent slots or insert objects
through the slots.