Product Manual

Machine Components
17
1. Sprayer Tank. The sprayer tank holds the chemical
2. Fill Cap. The fill cap has a ball check to allow air to enter the tank as the chemical is dispensed, but
does not allow chemical to escape the tank.
3. Gun Clips. Use the gun clips to store the spray gun.
4. Agitation Hose. The agitation hose sends liquid back to the tank to keep the chemical mixed.
5. Sprayer Pump. The sprayer pump makes the chemical flow to the spray gun and the nozzle.
6. Pressure Gauge. The pressure gauge is an indicator of the pressure in the system.
7. Inlet Hose. The inlet hose is the inlet line for the pump. Connected to the suction tube which has a
suction strainer to prevent debris from entering the pump.
8. Agitation Valve. The agitation valve allows the operator to turn ON/OFF the flow of liquid back to the
tank to keep the chemical mixed.
9. Pump Power Cord. The pump power cord connects the remote switch to the pump.
10. Wire harness. The wire harness switch allows the operator to safely turn ON/OFF the sprayer.
11. Hose Wrap. The hose wrap is built into the tank, and provides a storage location for the gun hose.
12. Gun Hose. The 228" gun hose transfers chemical from the pump to the spray gun.
13. Spray Gun. The spray gun has two spraying modes; stream and cone.